ARNO-High Pressure Machine Vise
narrow body design
Power Amplifier:
mechanical-hydraulic- setting of the clamping force by a marking (a) which corresponds to approximately 10 kN per mark
- build-up of the clamping force by turning the manual crank is especially easy with this type of spindle
- adjustable slip clutch (d)
Power Amplifier:
mechanical-mechanical- precise adjustment of the clamping force through adjusting ring (b)
- possibility of pre-clamping (c) for
- elastic work pieces
- multiple work pieces
- employment of compensating jaws
- adjustable slip clutch (d)
The ARNO-high pressure machine vise convinces through matured technology, which has been tested in practical applications for more than 40 years.
The “narrow body “ design enables the operator to place several vises close to each other.
This quality product is characterized by special attributes:
- in order to prevent a “tipping” of the work piece the mounting surface for the fixed jaw is ground with a negative relief angle
- base and upper section made of high-quality modular cast iron GGG 60
- all functional surfaces precision-ground and hardened
| Size b | Order-no. | Clamping- force [kN] |
Clamping range "S" adjustable through bolts |
Weight [kg] |
|||
| mechanical- hydraudical |
mechanical- mechanical |
Range 1 | Range 2 | enlarged clamping range* |
|||
| 90 | 04.10.090.000.9 | 04.11.090.000.9 | 25 | 0-80 | 75-155 | (190) | 13,5 |
| 125 | 04.10.125.000.9 | 04.11.125.000.9 | 40 | 0-105 | 100-205 | (255) | 25,0 |
| 160 | 04.10.160.000.9 | 04.11.160.000.9 | 50 | 0-155 | 150-305 | (365) | 50,0 |
| 200 | 04.10.200.000.9 | 04.11.200.000.9 | 80 | 0-210 | 165-375 | (435) | 90,0 |
| L4 | L5 | |||||||||||
| Größe b | L1 | L2 | L3 | min. | max. | min. | max. | b1 | h2 | h1 | h2 | d1 |
| 90 | 355 | 70 | 35 | 409 | 564 | 509 | 664 | 14 | 230 | 52 | 18 | M12 |
| 125 | 425 | 80 | 60 | 489 | 694 | 613 | 818 | 16 | 265 | 65 | 21 | M12 |
| 160 | 570 | 90 | 95 | 575 | 880 | 712 | 1007 | 16 | 300 | 80 | 25 | M16 |
| 200 | 680 | 120 | 115 | 730 | 1105 | 857 | 1232 | 25 | 340 | 97 | 25 | M16 |
* Enlarged clamping range through fixing the bolt into the cross groove of the spindle nut (watch for increasing deflection!)
Subject to change!
The complete brochure is available under PDF-Download as Adobe-PDF-file.
