KESEL-BULL pneumatik
(with stroke)
- Compact design - machine vise for NC-operations
- Quick-Step rapid adjustmet of the movable jaw
- Controllable, high clamping force through torque wrench (not included)
- Guide ways hardened and ground
- Insensitive to chips:
no threaded spindle in chip area, movable jaw can be pulled off
KESEL-BULL Quick-Step-Rapid Adjustment:
The movable
clamping jaw is set free by turning the spindle, the clamping width can
be preset
quickly. The clamping mechanism of the machine vise is locked
by turning the spindle again,
the work piece is clamped using compressed
air.
| Power amplifier: |
Integrated pneumtic pressure transmission with 3.5 mm stroke |
| Actuation: |
Force build-up by inducing compressed air into the pneumatic piston |
| Clamping force: |
A max. of 6.5 bar generates 40 kN |
| A min. of 1 bar generates 5 kN |
|
| Mounting: |
Using 4 toe clamps (included). |
| ... by means of a zero-point clamping system, i.e. two bore holes |
|
| Ø 25H6 with 200 mm distance are integrated into the base plate. |
|
| Alignment: |
... using integrated longitudinal and cross keyways 20H7, |
| or zero-point clamping system. |
| Size b |
Order-no. | Max. clamping force [KN] |
Max. air pressure [bar] |
Clamping range | Weight [kg] |
|
| s1 | s2 | |||||
| 125 | 04.25.153.001.9 | 40 | 6,5 | 0 - 165 | 80 - 240 | 35,0 |
| Size b |
L1 | L2 | L3±0,03 | L4 | L5 | h | h1 ±0,02 |
h2 |
| 125 | 400 | 495 | 88 | 190 | 36 | 140 | 100 | 21 |
Delivery: 1 x standard set of jaws (2 smooth clamping jaws mounted),
4 toe clamps, 1 x manual crank for fine tuning of the clamping width.
Clamping force diagram
Important operating instructions:
• Read the manual before starting to operate the vise!
• Do not choose a stroke over 3.5 mm.
• Max. pressure of the compressed air is 6.5 bar.
• Min. pressure of the compressed air is 1.0 bar.
• Use only „lubricated air“ (maintenance unit).
• Protect the hoses in the working space against damage and bending.
The complete brochure is available under PDF-Download as Adobe-PDF-file.
