Gear Deburring Machine EM-3

AVI Download Video (6MB)
Kesel Zahnrad Entgratmaschine EM-3The Kesel EM-3 gear deburring machine
has been developed for the deburring
and / or chamfering of both internal and
external gears, bevel gears, spiral bevel
gears and similar shaped components.
For environmental reasons the machine
is designed for dry operation, therefore
an exhaust system with filter has been
incorporated into the design. It is also
possible to purchase the machine type
EM-3W which is a machine that not only
deburrs but also washes the part.
A standard 220 Volt electrical outlet and
a 6 bar (87 psi) air supply are all that is
needed for the operation of the EM-3.
After programming the RPM and the
number of revolutions you put the gear
in place shut the safety door and the
deburring cycle starts automatically.
The gears are clamped with a specially
designed 3 jaw chuck which can clamp
both internal and external gears and
withstand the dirty work environment.

Entgraten von Zahnrädern
Up to three grinding or brushing tools may be used to deburr gears of up
to 400 mm (15,8") in diameter.

Siemens OP77 Steuerung The fully graphic-based Siemens OP77 display
represents processes as a bar diagram. The 4.5"-size
display allows clear and easy readings. Data input
is done via a dirt-resistant membrane-sealed keypad.









Specification KESEL Gear-Deburr Machine EM-3
Dimensions   Depth x Width x Height
1065 x 1370 x 2000 mm (38 in x 50 in x 79 in)
Weight
Control
Machine housing
Options
Clamping-table diameter
Work piece diameter
Pneumatic pressure
Suction unit
Table 		  400 kg (882 lbs)
Digital Control Siemens OP77
Fully enclosed housing
3 grinding tools maximum
300 mm (11.8 in)
400 mm (15.8 in)
6 bar (87 psi)
1700 m3/h
Continuously variable r.p.m. control;
pneumatic work-piece clamping


Electrical Connection		    
Pre-circuit breaker
Connecting power
Nominal voltage
Nominal working current
Control voltage 		  16 A
2 kVA
230 V 50 HZ
5 A
24 V

Zahnstangen-Fräsmaschinen

Georg Kesel GmbH & Co. KG is a leading manufacturer of rack milling machines.
Through our close relationship with customers we have developed the EM-3 gear
deburring machine. We also offer the machine typ EM-3W with integrated part
washing. High volume deburring machines which are totally automated and machines
for larger components can be offered on request. In addition to rack milling machines
and deburring machines we also manufacture a complete line of high pressure vises.

Zahnstangenfräsmaschinen

The complete brochure is available under PDF-Download as Adobe-PDF-file.


Zahnrad