Bull 5-S
The Bull 5-S is the compact vise for 5-sided machining as well as for clamping raw parts. Optimised force flow, minimal deformation and therefore optimum milling results are ensured by the Bull 5-S pull-down clamping system.
- Optimal accessibility for 5-sided machining
- Precise, repeatable clamping force by using a torque wrench
- The right jaw for every workpiece from our versatile jaw range
Read more
The dirt-resistant spindle guarantees trouble-free operation for all machining operations. Thanks to the mechanical build-up of clamping force via a threaded spindle (without force intensifier), the Bull 5-S is ideally suited for use with “Grip” clamping jaws.
Specifications
| Parameter | Value |
| Technical Data | |
| Clamping range | With step jaws: 0–166 mm | With multi jaws: 10–185 mm | With pendulum jaws: 6–153 mm |
| Clamping force | 40 kN (at 105 Nm crank torque) |
| Weight | 18 kg (without jaws) | 23 kg (with step jaws) |
| Area of Application | |
| Application | Mechanical compact vise ideally suited for 5-sided machining of workpieces. The direct build-up of clamping force ensures absolutely secure clamping of the workpieces. With our “Grip” clamping jaws and pendulum jaws, raw parts can also be clamped absolutely securely. |
| Features | |
| Base body | Robust steel base body |
| Chip protection | Optimal chip protection |
| Alignment | Alignment via cross slots or via zero-point clamping systems |
| Variant | |
| General | |
| BULL 5-S – without jaws | 04.25.150.002 – select the appropriate jaws from our jaw range |
| BULL 5-S – with step jaws | 04.25.150.0000 – assembled with step jaws |
FAQ – frequently asked questions
The detent lugs on the spindle can be turned downwards by hand by 180°.
The movable jaw can then be moved and locked in the desired position.
Positioning against the workpiece and clamping are carried out using a torque wrench with a 1/2"" square drive.
No, the chips can be flushed out of the Bull 5-S machine vise through the large lateral slots or from the spindle side.
The threaded spindle is encapsulated and protected against chips.
Yes, the Bull 5-S machine vise can be raised using a console screwed on underneath.
Yes, all jaws from the Bull Mechanical can be used.
Yes, the clamping block can be pulled out backwards together with the jaw and reinserted after being rotated by 180°. This allows the clamping range to be changed very quickly.
These are spring-loaded pressure pieces. Our step strips (support strips) can be snapped into them.